Acide detergent for membrane cleaning, suitable for scaling deposits removal
EB-Cleaner A1 is particularly suitable to remove scaling deposits due to calcium carbonates and iron oxides from reverse osmosis equipments.
– Quick removal of a wide range of precipitates and deposits.
– It does not contain corrosion inhibitors that may pollute membranes
– Extreme pureness of the products.
– It does not contain chlorides, sulphates, nitrates and phosphates.
Instructions: prepare a solution of EB-Cleaner A1, made with chlorine free water, until the solution obtained reaches a 2 – 3 pH, normally 1% or maximum 2 % of the product is enough, then make is flow through the membranes; washing time depends on the fouling rate, normally 1-2 hours are enough.
Anyway, try always to respect what membranes manufacturers recommend, especially temperature and pH limits.
Dosage: from 1% to 2% Volume/Volume
Handling: see the safety data sheet. Adopt the main cautions concerning acid chemical products handling.
Preservation: keep away from excessive cold and heat.
The information contained in this document is based on our present knowledge and must not be considered as a guarantee of specific properties.
Formulation: Acid compound
Aspect: Colourless liquid
pH sol. 1%: < 2.0
Density at 20°: 1,097 ± 0,02 g/ml
Freezing temperature: < 0° C
Packaging: 1 Kg
Class ADR/RID/IMDG/IATA: 8 (UN 1719)