Your cart
There are no more items in your cart
High Quality Needle Valve full AISI 316L Stainless Steel – 1/2″ FF
NLS-012
€99.00
€99.00
tax excl.
Very compact stainless steel needle valve with G 1/2" threads. This valve can be used as a reliable shut-off valve, or to accurately control (relative low) flow rates of clean gases or fluids. The valve has a nominal internal diameter of 4.8 mm. The seals are made of PTFE. The max pressure is 300 bar and the allowable temperature range is from -20 to max. 200°C. Thanks to the high quality materials and robust construction, the valve is suited for high pressures and agressive fluids.
Very compact stainless steel needle valve with G 1/2" threads. This valve can be used as a reliable shut-off valve, or to accurately control (relative low) flow rates of clean gases or fluids. The valve has a nominal internal diameter of 4.8 mm. The seals are made of PTFE. The max pressure is 300 bar and the allowable temperature range is from -20 to max. 200°C. Thanks to the high quality materials and robust construction, the valve is suited for high pressures and agressive fluids.
- Smooth and accurate flow control
- Reliable leak tight shut off
- Very compact design
- High pressures up to 300 bar
- Wide temperature range from -20 up to 200°C.
- Suited for agressive fluids thanks to the 316 stainless steel and PTFE seals
Specification
-
Connection size1/2 inch
-
MaterialStainless steel
-
Seal materialTeflon (PTFE)
-
OperationHandle
-
Max pressure difference at 20 °C (bar)300
-
Connection typeInner thread cylindrical BSPP-G
-
Material qualityStainless steel 316 (1.4401)
-
Valve bore (mm)4.8
-
Kv value (m3/h)1.08
-
Min temperature (°C)-20
-
Max temperature (°C)200
-
Spindle and/or hand wheel risingYes
-
Article compression classPN 300
Tap to zoom
Visit our Forum
You can find all the documentation online and the answer to many questions.
