This strong unit is built to last and comes as standard with one to four high rejection and high productivity Toray CSM membranes in size 2,5″x21″, worldwide available, which can supply from 60 to 120 l/hour of freshwater.
A new concept of vessel rack made in composite, strong and very lightweight is supplied as standard.
Its modular design allows an easy handling of the components even in the narrow spaces of a boat .
An heavy duty plunger pump with brass head allows a saving compared to the stainless steel version and if regularly flushed after each use, will not experience corrosion problems for many years.
A high-efficiency, magnetic driven feed pump, is supplied as standard for carrying the seawater to the high pressure pump. It is maintenance free and and allows salt water to remain inside without any problem.
The pre-filter system is equipped as standard with our “Easy Flushing System”, which allows the flushing of the plant with a simple switch positioned on the control panel. An emergency device can override the solenoid valve in case of fault and the flushing is performed manually.
The watermaker can be operated from a remote panel with low tension switches (no presence of 230V in the panel). A separated 230V switch box (IP65), which can be positioned at any distance from the panel, includes as standard a thermal and magnetic protection device for the motor and a hour counter for the servicing intervals
The delivery includes all the components and fittings for the installation, except the standard hoses and the extensions of the electric cables, which need to be provided aboard. The rack of the vessel, the motorpump, the panel, the switch box, the prefilters, are provided pre-assembled and pre-wired, ready to go.
No specials skills or wrenches are required to perform this job.
|
Watermaker series “Just Water 2521” – Brass Pump – 60/90/120- l/h – PRO Version |
||||
| Model | l/h. ( l/day) | Membranes | Watt | Notes |
| JW2521-60-B | 60 l/h. (1440 l/day) | 2 Membranes 2521 | 1500W | |
| JW2521-90-B | 90 l/h. (2160 l/day) | 3 Membranes 2521 | 1500W | |
| JW2521-120-B | 120 l/h. (2880 /day) | 4 Membranes 2521 | 1500W | |
Standard Equipment
| ♦ | 230V AC 1.5kw hollow shaft motor made for continuous duty at 40˚C ambient temperature. |
| ♦ | High pressure triplex pump with ceramic plunger with brass head. |
| ♦ | Maintenance free, magnetic driven feed pump |
| ♦ | Twin pre filtration unit (housings for 20 and 5 micron, 10″ filters). |
| ♦ | Easy Flushing System. |
| ♦ | Activated carbon filter to remove the chlorine from the flushing water. |
| ♦ | pH Stabilizer post-filter for permeate. |
| ♦ | Vessel rack made in composite, very strong, elegant and lightweight. |
| ♦ | Toray CSM 2.5″ x 21″ seawater reverse osmosis membrane. |
| ♦ | Control panel in black ABS with: – Pressure control needle valve – Glycerine damped pressure gauge – Fresh water flow meter. – Switches for the pumps – Switch for the “Easy Flushing System” |
| ♦ | IP65 switch box for the pumps with motor protection and hour counter |
| ♦ | All the needed fittings. |
| ♦ | Installation/operation manual. |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
