Watermakers series "ZERO" 12 Volt (370 Watt) 55 l/h
£2,448.46 tax excl.
$2,962.16 tax excl.
In the Blue Gold ZERO series Watermakers you will find only the essential components of a well-functioning reverse osmosis desalination plant.
The required power is very low, only 370 Watt (30 Amperes) and you can produce freshwater without the need of a generator or a big alternator on the engine of the boat.
The Blue Gold ZERO Watermaker is intended for use by recreational yachts where purchase and maintenance of the desalination plant on board need to be economic. Around this simple, inexpensive and very reliable watermaker for nautical use, you can install additional components according to the specific needs of the boat.
In the Blue Gold ZERO series Watermakers you will find only the essential components of a well-functioning reverse osmosis desalination plant.
The required power is very low, only 370 Watt (30 Amperes) and you can produce freshwater without the need of a generator or a big alternator on the engine of the boat.
The Blue Gold ZERO Watermaker is intended for use by recreational yachts where purchase and maintenance of the desalination plant on board need to be economic. Around this simple, inexpensive and very reliable watermaker for nautical use, you can install additional components according to the specific needs of the boat.
This small unit is built to last and comes with 1x 2540 (55l/h) high rejection and high productivity seawater membranes. A new vessel rack made in composite, strong and very lightweight is supplied as standard.
Its modular design allows an easy handling of the components even in the narrow spaces of a boat .
It can be equipped with the FOG high pressure pump (head in brass), very economic but strong, or with the MIXTRON high pressure pump in Technopolymer both especially designed for the reverse osmosis. These pump are quiet and reliable.
A small feed pump, is supplied as standard for carrying the seawater to the high pressure pump.
The watermaker is supplied in do it yourself kit, but no specials skills or wrenches are required to perform this job. Inserting the membranes in the pressure vessel is a simple job and you can follow our YOUTUBE video to get it done.
The high pressure unit is delivered already mounted and tested.
Models with FOG Pump in Brass
Model | l/h. ( l/day) | Membranes | Volt-Amp. | Notes |
---|---|---|---|---|
ZERO-12-55-F | 55 l/h. (1320 l/day) | 1 Membrane 2540 | 12V-30A | Length of the Vessels = 115 cm |
-
Models with MIXTRON Pump in Technopolymer
Model | l/h. ( l/day) | Membranes | Volt-Amp. | Notes |
---|---|---|---|---|
ZERO-12-55-M | 55 l/h. (1320 l/day) | 1 Membrane 2540 | 12V-30A | Length of the Vessels = 115 cm |
---
Scope of Delivery | LIGHT Version |
---|---|
High Pressure Pump + Motor with Vibration Dampers | YES |
Feed Pump | YES |
Single Prefitration System | YES |
Activated Carbon Filter for Rinse Water | YES |
Vessel Rack in Composite + Reverse Osmosis Membranes | YES |
High Pressure Regulator fastened to the Vessel Rack | YES |
Pressure Regulating Valve | YES |
Safety Valve | YES |
High Pressure Gauge (Glycerine damped) | YES |
Freshwater Flowmeter | YES |
3-way Valve for flushing | YES |
Panel with 2 switches for the pumps | YES |
High pressure hose (from the pump to the vessels) | YES |
All the Hydraulic Fittings needed for the installation | YES |
Owner's Manual | ON LINE |