The “Do It Yourself” kit of the Just Water model, comes complete with all the necessary to let you mount your own watermaker. In less than 1/2 day of work you can have all the components ready to be fitted in your boat. Only the electric panel comes pre-assembled.
No specials skills or wrenches are required to perform this job.
This series was developed for “Conscious Sailors“ who need to produce water reliably, cheaply and without any frills. This is the simplest to use watermaker, without fancy electronics or expensive spare parts. Just Water are just watermakers that work perfectly without any problems.
This strong unit is built to last and comes as standard with two high rejection and high productivity CSM Toray membrane in size 2,5″, which can supply from 55 to 80 l/hour of freshwater. A new vessel rack made in composite, strong and very lightweight is supplied as standard.
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
The “Just Water” reverse osmosis watermaker features an AISI 316 pressure regulator and an AISI 316 glycerine damped pressure gauge at the end of the pressure vessel, eliminating the use of a flow panel.
This solution makes the installation not only cheaper, but also very reliable and much easier to fit into the boat.
|
Model with BRASS PUMP HEAD (-B). |
|||||
| Model | l/h. ( l/day) | Membranes | V-A | Notes | Price (+VAT) |
| JW-55-B2-D-12 | 55 l/h. (1320 l/day) | 1 Membrane 2540 | 12V-54A | DIY kit | |
| JW-55-B2-D-24 | 55 l/h. (1320 l/day) | 1 Membrane 2540 | 24V-36A | DIY kit | |
| JW-60-B2-D-12 | 60 l/h. (1440 l/day) | 2 Membranes 2521 | 12V-54A | DIY kit | |
| JW-60-B2-D-24 | 60 l/h. (1440 l/day) | 2 Membranes 2521 | 24V-36A | DIY kit | |
| JW-80-B2-D-12 | 80 l/h. (1920 l/day) | 3 Membranes 2521 | 12V-54A | DIY kit | |
| JW-80-B2-D-24 | 80 l/h. (1920 l/day) | 3 Membranes 2521 | 24V-36A | DIY kit | |
Standard Equipment
| ♦ | 12V or 24V Electric Motor made for continuous duty at 40˚C ambient temperature. |
| ♦ | High pressure triplex pump with ceramic plunger with brass head. |
| ♦ | Feed pump |
| ♦ | Single pre filtration unit (housing for 5 micron 10″ filters). with low pressure gauge and activated carbon filter to remove the chlorine from the flushing water. |
| ♦ | NEW!! Vessel rack made in composite, very strong, elegant and lightweight. |
| ♦ | CSM Toray 21″ seawater reverse osmosis membrane. |
| ♦ | Pressure control needle valve and glycerine damped pressure gauge in AISI 316. |
| ♦ | Fresh water flow meter. |
| ♦ | Control box for the pumps. |
| ♦ | Valves system for flushing of the device. |
| ♦ | Custom cut high pressure hose from HP pump to the membrane vessel. |
| ♦ | All the needed fittings. |
| ♦ | Installation/operation manual. |
Optional Equipment
| ♦ | Easy Flushing System. | |
| ♦ | Custom control panel | |
| ♦ | Feed pump |
