€ 3.30 + 20% VAT (if due)
excl. 20% VAT plus Shipping Costs
This quick fitting can accommodate the 3/8″ hose and can be used for driving the permeate.
The use of a 3/8″ hose is recommended for water makers with an output greater than 80 l/h.
The “UNIVERSAL SHORT” taper thread has been designed to offer the following advantages to the users:
• reduced overall length;
• smaller hex dimensions compared to the parallel threads;
• to allow the assembly with different female threads both taper as well as parallel (BSPP, BSPT, NPT).
This quick fitting can accommodate the 3/8″ hose and can be used for driving the permeate.
The use of a 3/8″ hose is recommended for water makers with an output greater than 80 l/h.
The “UNIVERSAL SHORT” taper thread has been designed to offer the following advantages to the users:
• reduced overall length;
• smaller hex dimensions compared to the parallel threads;
• to allow the assembly with different female threads both taper as well as parallel (BSPP, BSPT, NPT).
| Weight | 0.1 kg |
|---|
